A (very late) Late November Steelhead Report

I fished the Salmon River in upstate NY on November 21-22 and I’m just writing about it today. Sloth? A little. Busy? Yessir. Late? Most definitely. So let’s get to it.

The drive up was a challenge; it was clear sailing from Connecticut until the Rome area, and then it was heavy lake-effect snow the rest of the way. (This was that system than buried Buffalo.) The roads weren’t plowed, and I passed numerous vehicles stranded in ditches. That’ll get you to slow down and pay attention.

Monday the 21st was a challenging day. We launched out of Altmar — I was floating with guide to the stars Row Jimmy — and although we found a pool with fish, the action wasn’t exactly red hot. We moved from one side of the pool to the other, and over the course of five hours we saw a dozen fish hooked, but only one landed. (I was responsible for three of the hookups and no landings.) Our best guess was that the takes were of a more subtle nature, and it didn’t help that I wasn’t on top of my game. None of the fish I touched were on for more than a few seconds; that tells me either a bad hook set or a very light take, or maybe both. Either way, you’ve got to be hard and fast and sure on your hook sets and I was certainly not.

James Kirtland is one of those guides who can tie knots quickly and efficiently and have you back in the water in no time flat. He’s also the kind of guide who will tell you when you’re doing something wrong, and offer suggestions to correct the issue. We all put our waders on one leg at a time, and I’m no different. Jim noticed that because I was using two hands to manage the line during the fly’s trip through the strike zone, I was losing precious micro-seconds on my hook sets. With one hand, excess slack eliminated, and the fly line gripped firmly against the cork, I could drill the hook point home with far greater efficiency. This is just one of the many things I’ve learned from Jim over the years, and it proved to be a difference maker on Tuesday.

We arrived at the Altmar boat launch Tuesday morning only to discover that I’d left my rod on top on my truck in Pineville. By the time we got back — whew, rod recovered! — we were late enough to not be able to get where we wanted to fish. That turned out to be a good thing, as Jim’s fellow guides reported the previous days’ pool was empty. (The river had come down to 500cfs from 750, and we figured the fish realized they had no depth of flow and skedaddled overnight.) So we set up shop in some fast water and spent the entire day in a few slots that took up no more than 50 yards of river. Right away we were into steelhead; I dropped the first, landed the second, and the third came off just as we were readying the net. But I was right on my hook sets, and it felt good even though the batting average was below .500.

Here’s the slick run we hit first. I’m always amazed at how many steelhead can fit into one little slot.
We moved downstream and systematically carpet bombed a swift, churning run. After a morning egg bite, the steelhead got into my collection of small stoneflies: 60 Second Redheads, 60 Second Copperheads, and Copperhead Stones. I hooked 4 fish from late morning to early afternoon; this was the only one I landed. One came off right away. The second was a double-digit pound chrome beast that made a beeline for the Lake; I was into my backing so fast that I had no choice but to try and crank the handle. Doink! Broken off. It’s hard to get upset about episodes like that; when you’re in a boat, you can either lift anchor and follow the fish, or stay put and take your chances. You can’t undo the first option, so you accept a possible poor outcome and move on. The third one I dropped surprised me; I nailed him with my hook set, battled him hard and well, and then for no apparent reason, ploink! Sigh. Still, after Monday’s disappointment, two in the hoop felt like a bounty.

Top 5 Steelhead Nymphs for Salmon River, Pulaski

The best steelhead nymphs are the ones in which you have the most confidence. After all, “best” isn’t measurable. But if you buy into the old saw that the proof of the pudding is in the eating of it, I’d like to offer up five steelhead nymphs that have proven their worthiness on New York’s Salmon River.

So, what qualifies a steelhead fly as a nymph? For the purposes of this list, I’ve kept it to flies that are size 8 or smaller; flies that feature predominantly muted colors (hot spots, contrast points, and bead heads are allowed); and flies whose basic construct is at least 50% actual invertebrate driven. So, no bigger stoneflies here. No Steelhead Hammer types. And no black-light poster colors. Here we go, in no particular order. As a bonus, some of the patterns have links to my tying video.

Soft-Hackled Bead Head Pheasant Tail. I was pleased no end to discover that Salmon River steelhead would eat this rather muted pattern. I’ve done really well with this fly in winter.

60-Second Redhead. The beauty of this fly isn’t that if you lose one to the bottom gods, you’re not depressed because they’re so fast and easy to tie. It’s that this fly, which would never catch your eye in a retail bin, is like candy to steelhead when they’re eating bugs.

60-Second Copperhead. After pounding up so many steelhead on the redhead, I wondered if they’d like a version with a copper Ice Dub head. A wise old Salmon River veteran once told me, “It’s hard to go wrong on this river with black and copper.” He was mighty right.

Copperhead Stone. I landed my first steelhead on this fly, and years later, it still works. I remember one morning in the Lower Fly Zone when I was handing them out to everyone who wanted to know, “What fly are you using?”

Spider. Another ridiculously simple tie (notice a pattern here?): size 12 hook, black Krystal Flash tail, black Estaz body, copper (the original calls for olive or pearl) braid flashback. Designed by Clyde Murray for Erie fish, the Salmon River steelhead like it just fine.

My top five steelhead nymphs for the Salmon River in Pulaski, NY, are all very simple ties. Note that they all have some kind of contrast, flash, or hot spot. These are all high-confidence patterns for me, all proven producers, and it’s hard to go wrong with any of them when you suspect the steelhead are eating nymphs.

Some steelhead standards and a wee bit of junk

Regrettably, I’ve spent far too little time this fall at the steelhead bench. To be fair, part of that’s due to a well-stocked box. Here are a few old reliables, and some eggy/junky stuff the steelhead might like.

OLYMPUS DIGITAL CAMERA

Get fired up for steelhead: “The Steel Deal — How to catch Great Lakes Steelhead in the Fall”

“The Steel Deal — How to catch Great Lakes Steelhead in the Fall” first appeared in the Oct/Nov 2018 issue of Field & Stream. It’s a great introductory primer for Great Lakes steelhead fly fishing anglers, and even veteran chrome hounds will find some valuable nuggets. Written, of course, by yours truly, with insights from legendary Great Lakes steelhead guide Matt Supinski. In case you missed it, the link to the article is up top. And here’s a bonus link to the 60-Second Redhead, one of my favorite steelhead patterns.

Subfreezing temperatures? Stinging sleet? Frozen fingers? Suck it up, baby, and go steelheading! Here’s Number Two Son Cameron and my favorite Salmon River guide Jim Kirtland enjoying a little “Salmon River sunshine.” Is it all worth it? Just look at those smiles.

OLYMPUS DIGITAL CAMERA

The best flies for steelhead are…

…the ones you have the most confidence in.

Here’s a batch of such steelhead flies, along with a few new ones to place into the rotation. I love the ritual of fly box replenishment. So much potential glory stuck into wine corks.

All that’s needed now are some waiting and willing mouths.

OLYMPUS DIGITAL CAMERA

 

Meanwhile, up north in Pulaski…

…my spies tell me it’s good news/not-so-good news. The good: after a couple very down years, the 2016 salmon run has been strong. Here’s a quote from a local guide: “I thought that it would be a good run this year but it has far exceeded expectations.” More good: the watershed received several inches of much needed rain last week. The river jacked up to 2K; current level at Pineville is just over 700cfs. Everyone’s different, but I like higher water for this fishery. A strong salmon run means more eggs and rotting carcasses in the system, so right now is a good time to be tying up some egg and flesh patterns (and of course your favorite nymphs).

Now to the not-so-good: where are the steelhead? Those of us who remember the cruel disaster than was last year’s “run” are eager to return to the halcyon days of prodigious numbers of pre-spawn chrome. So far, that has not happened. Hopefully the next few weeks will see a big push of fish. Otherwise, we may be in for another long, cold, lonely winter.

Come back, baby!

OLYMPUS DIGITAL CAMERA

 

 

Ten Things Every Beginning Steelheader Should Know

“Ten Things Every Beginning Steelheader Should Know” first appeared in the October 2015 issue of Mid Atlantic Fly Fishing Guide. I had a lot of fun with this piece, as it mixes humor with practical advice. Even if you’re an old hand, you might find something useful here. Many thanks to MAFFG for allowing me to share it on currentseams.

So, you’ve decided that you’re going to take up fly fishing for steelhead. I don’t know whether to congratulate you or console you. No other form of fly fishing produces such soaring emotional highs or soul-crushing lows. But, the least I can do – as someone who was once in your bright-eyed position – is prepare you for what lies ahead.

Stop. Turn back now before it’s too late. Steelheading is an addiction. And once you’re hooked, dealers in the form of social media fishing reports, grip-and-grins, river conditions, dam release schedules (not to mention endless discussions about rods, reels, flies and gear) will have you at their command. “Obsession” is not too strong a word. Work, social, home life – will all suffer for the pursuit of fresh chrome. You think I’m writing this tongue-in-cheek. I am not.

Expect harsh weather. Great Lakes steelheading is largely a fall, winter, and early spring game. Be prepared for some of the most unforgiving conditions you’ve ever experienced: single digit (or lower) temperatures; lake effect snow; more lake effect snow; really, any and all forms of frozen precipitation. Truthfully, plain cold isn’t that bad. It’s the thirty-four-degrees-and-raining days that cut to the bone. Dressing like you’re going on an expedition to Everest is rarely a bad idea. Fleece is your friend. Think multiple, breathable layers. And those hand and toe warmers they sell in convenience stores? Buy many, many packs.

Prepare yourself for the demanding conditions of a big river. A skunking can be the least of your worries, as this sign along the banks of New York’s Salmon River warns.

srsign

~

Find a tippet you can trust. The most obvious dichotomy in steelheading is that you’re using a light tippet to land a very big fish. So your tippet material must be small enough to remain unnoticed by the steelhead, and strong enough to withstand a heated battle. Here are two such materials: Drennan six-pound fluorocarbon and Maxima Chameleon six-pound nylon. Be ruthless about the condition of your tippets. Check them frequently for abrasions or wind knots. If you find problems, replace the tippet. You’ll be happy you did when you’re fighting that fifteen-pound hen fresh from the lake.

The flies are a little strange. You can catch steelhead with a tuft of Day-Glo yarn tied to a hook, or a few turns of Estaz wrapped around the shank. You may hesitate to call these things flies. Nonetheless, they work. Don’t be afraid to experiment with more traditional patterns and color palettes. Small, simple black stoneflies (like the 60-Second Redhead) and bead-head Pheasant Tail-types account for a significant number of my Great Lakes steelhead every season.

Fluorescent colors dominate a typical steelhead fly box. While egg patterns, gaudy bead heads and brightly accented stoneflies like these certainly catch fish, so do flies in muted, natural colors.

steelhead-flies

Life is not fair. Neither is steelheading. You can do everything right, from presentation to hook set to managing leaps to applying pressure, and still lose the fish. You can do all those things wrong and then land the fish. You can stand in a lineup while every angler above and below you hooks multiple fish and you blank. The spot where you caught a dozen one day is a barren steelhead wasteland the next. I gave up trying to figure it all out years ago.

Sometimes steelheading makes no sense. On this warm late November day, the river was high from snowmelt, the color of chocolate milk, with visibility of less than a foot – and we still had a tremendous day of fishing.

Steel Cam and Me

~

Be prepared to put in your time. It took me forty hours of fishing to land my first steelhead. (It took my nine year-old son only thirty minutes. That was three years ago, and I’m still bitter about it. See “Life isn’t fair” above.) Experience will be your greatest teacher. Pay attention to factors like water temperature and water levels. For example, if the river is low, I know to head for what I call the hot water – snotty whitewater riffles and pockets. Learn where steelhead hang out in the cold winter months. Watch how other people fish. Note the methods of successful anglers. Most of all, get out and fish. You can’t catch steelhead from behind a desk.

Go find the fish. Don’t get lulled into thinking that because steelhead are migratory, they could show up at your feet any minute now. I’ve spent far too many hours – if not days – waiting for something to happen that never did. If you’ve blanketed a run with presentations and have come up empty, move. The fish that want to eat are somewhere else. And it is often true that where there is one hungry steelhead, there are many others.

Tom’s 60 Second Redhead, so named because it only takes a minute to tie. In this version, the abdomen is black Krystal Dub; the head red Ice Dub. This simple pattern excels in rivers with little black stonefly populations.

60Second RedHead

~

Hook set is everything. I suspect that more steelhead are lost to poor hook sets and dull hook points than any other factors. Most of the steelhead I lose come unhinged in the first few seconds of the fight. Get in the habit of checking your hook points early and often. If they aren’t sticky sharp, replace them. If you’re presenting under an indicator, watch it like a hawk. Look for a reason to set the hook on every drift. Set hard with a downstream sweep. Get tight to that fish fast, and set the hook again. Then, hang on. This is where the fun begins.

Don’t let them breathe. It’s easy to get caught up in the hype of a steelhead being in charge of any fight (though it’s true to some extent). Still, don’t let the fish intimidate you. Once your steelhead realizes that it’s hooked, it will want to run. Let it. It may want to leap and cartwheel. Enjoy the spectacle. But when it stops its histrionics, point the cork of your rod handle upstream, and crank that reel fast and hard. The fish stopped running because it’s exhausted. Don’t let it catch its breath. With a good hook set and a reliable tippet, you can put far more pressure on a fish than you think. Let the fish run again if it wants. Same drill: don’t let him breathe. Find that perfect equilibrium on your drag that makes the steelhead work hard for every foot of line without popping the tippet. Your goal is to land the fish as expeditiously as possible. The longer you play a steelhead, the more things can happen – and most of them are bad.

5mm neoprene insulated boot foot waders. In my opinion, this is the single greatest development in fly fishing for winter steelhead in the last 50 years.

Why we steelhead. Brilliant chrome from Lake Ontario, taken in two feet of whitewater during low flows on a black and purple North Country Spider Egg.

Fresh Chrome, November 2014

 

 

 

 

 

 

 

Steve Culton ties the 60 Second Redhead on HAN’s Yankee Fisherman

The host of Yankee Fisherman, John Kovach, was kind enough to feature me tying one of my favorite steelhead flies, the 60 Second Redhead, on the 12.10.15 show. The segment was recorded at the Arts of the Angler show back in October. You can see it here; I come in around the 17:40 mark. And of course there’s also the official currentseams tying video elsewhere on this site. Thanks again to John and Yankee Fisherman for their continued support.

Yes. The 60 Second Redhead catches steelhead. From November 2015.

OLYMPUS DIGITAL CAMERA

 

Of steelhead and stoneflies

Steelhead Stones

Front cork: 60 Second Redheads and 60 Second Copperheads.

Rear left cork: Copperhead Stones and BHSHPTs

Rear right cork: North Country Steelhead Spiders (purple and black), Spider (originated by Clyde Murray) variant

Mindset: Fresh chrome. Uncorked.