Small Stream Report 2/27/24: The kids are all right

I didn’t really have the time yesterday, but since my default setting is when in doubt, go fishing, I did. The venue was a small woodland stream, and the time frame was 3:45pm-5:30pm. It was mostly cloudy and very warm for February, with a water temp of 48 degrees. The stream was running medium-low and clear. No hatch activity, although I did see one lonesome sz 600 midge flitting about.

I’ve written before that I’m a massive creature of habit, but on this outing I decided to explore about 100 yards of new water. I was glad I did, as that turned out to be my most productive stretch. I fished mostly subsurface with the Squirmy Worm Jiggy Thingy, but I did get a hysterical swing and miss on a bushy dry for the 5 minutes I fished it. All told, I pricked about 18 and brought probably a third of them to hand. I did catch the same beautifully spotted hen I took in January at the same hole. She really clobbered the fly.

A few of my favorite things: a cigar, a glass rod, and a small stream, and if I can get them all at once that’s even better. What a glorious day to play hooky for a few hours and lose myself in a babbling brook.

TGIF Edition: Speaking at Yale, new Surfcasters Journal article, and exciting news teaser

Happy Friday, and and it’s a TGIF kind of day around currenseams HQ. It was a busier than normal week, what with two road hockey weekday games for #3 son Gordo and all the other stuff I’ve got going on.

On Tuesday night, I spoke and taught to the Yale Fishing Club. The Club is run by my good friend and paddle board angler extraordinaire Sean Callinan, and I’m always stoked to be able to teach the next generation of fly anglers. The subject matter was small streams, something near and dear to me, and we devoted plenty of time to preserving and protecting the resource. We finished by tying the Squirmy Worm Jig, which is both easy and highly effective. Many thanks again to the group for hosting me, and the pizza was swell, too!

Class is now in session!

I’m putting the finishing touches on a new article for Surfcasters Journal. It will be a little different in that it is story oriented, rather than how-to. It’s going to put a smile on your face when you read it. Of course, I’ll let you know when it comes out.

Finally, I just received some very exciting news that’s so big, it deserves its own post. My apologies for the teaser. I’m hoping to be able to share next week. I hope some of you are getting out to fish!

Currentseams Q&A: Wet fly leaders and fly choices

Welcome to a snow day edition of Currentseams Q&A. Yesterday I received an email from Bill who’d heard me on the Orvis Podcast How to Swing Soft Hackle Wet Flies with Steve Culton. His questions — and my answers — may be of interest to you. And here they are.

Q: Do you ever use the Rio Versileaders with differing sink rates when fishing wets?  I have used the 1.5 inches per second w some success but wanted to get your thoughts. Am I better off just adjusting sink rate by the size of the point fly? A: I do not. I adjust my sink rate and depth by adding weight to the point fly in the form of a brass or, most frequently, a tungsten bead. (Of course, strategic mends with a floating line are an important part of the process.) Sometimes I add weight, usually a single split shot, to the leader. That’s simply how I do it, and it works for me. I don’t know if you’re better off using my system — if you’re fishing happy with your Versileader, and your flies are where you want them, and the fish are eating them, that’s what I’d recommend. Confidence catches fish.

This is nymphing, but as with wet flies, if you’re hooking up, you’re fishing at the right depth.

Q: If you are on an a new stream with no intel, what is your go-to 3 fly set up? (Do you look under rocks first and just match size of nymphs?) I know where he’s going with this. Is there a default wet fly setup that works everywhere? Maybe, but that’s not how I would approach the problem. My go-to wet fly setup would be three bugs that I think are most likely to be hatching or present in the current system. This would vary from season to season, time of day, and certainly by geographical region. For example, if it’s summer in southern New England at noon, I might go with a caddis, a terrestrial, and an Isonychia-type on point. If it were the same region in the evening, I might switch out the terrestrial for a creamy mayfly. And of course, I would be watching for any kind of hatch or rise activity for clues. Then I’d have intel, plus whatever the fish were telling me. Remember, droppers are the fastest way to find out what the fish want. The looking under the rocks solution is also a good one.

Q: I don’t tie.  Recommendations for high quality wets? I wish I could give you a name or a place, but sadly I don’t have one. A good wet fly selection is hard to find these days, which is why I always recommend that wet fly aficionados learn to tie. I sometimes do custom orders, but right now I am not taking any orders for a few months. Your best bet is to do an internet search and see what you can find. Good luck!

Chances are slim that you’ll find LaFontaine’s Diving Caddis in tan, size 14, at your local fly shop. If you learn to tie your own, you’ll have a constant supply.

It’s action time! Help put an end to all this Farmington River flow crap.

Get out your email writing hats, folks. State Representative Mark Anderson is requesting that two bills be raised that will give us the consistent flows we deserve. The determination may come as early as next week, so let’s hop to it. You need to send an email to four legislators on the Environment Committee with the power to make this happen. They are:

Joseph.Gresko@cga.ct.gov

Rick.Lopes@cga.ct.gov

Patrick.Callahan@housegop.ct.gov

Stephen.Harding@cga.ct.gov

Representative Joseph Gresko, Chairperson, Senator Rick Lopes, Chairperson, Senator Stephen Harding, Ranking Member, Representative Patrick Callahan, Ranking Member

Here’s a sample letter. Please adjust it as you see fit.  It’s best if you put it in your own words and add as much detail as to how the flow affects your use of the river. 

“Please raise for a public hearing two bills that have been proposed to the Environment Committee to address erratic flows in the Upper Farmington River. This nationally renowned and federally-designated Wild and Scenic River begins below the MDC’s Goodwin Dam in Hartland and flows for 15 miles through Barkhamsted, New Hartford, and Collinsville (Canton). Less than two miles upriver of this dam is the Colebrook River Dam which is a flood control dam owned by the U.S. Army Corps of Engineers (USACE). Currently, the USACE will only release (or hold back releases) when requested to do so by the MDC. 

The first bill requires the MDC to make requests for releases from the Colebrook River Dam, as necessary, to maintain the flow of water in the West Branch of the Farmington River at or above a rate determined to be a sufficient minimum flow rate by DEEP.

The second bill directs DEEP to oversee an update to the Farmington River Instream Flow Study last completed in 1992, which is linked here:

http://www.farmingtonriver.org/application/files/9814/7699/4131/FmgtnRiverInstreamFlowStudySum.pdf

Updating this study will provide information to determine the best flow regime for the Upper Farmington River to support its ecological health and recreational flows in light of changes in climate, as well as recent changes to state and pending changes to federal regulations governing the water in Colebrook River Reservoir.

Thank you for considering these two bills. 

Sincerely, 

Name 

Town “

Now, if you’ll excuse me, I gotta go write an email…

Gill Candy soft hackle for panfish

I finally got around to sending out flies for the 1,000 Followers contest. One of the winners requested some size 10 soft hackles for bluegills, crappie, and bass. I did a little digging of the “Best soft hackles for panfish” type — and the overwhelming favorite soft hackles for panfish were simple, traditional old favorites like the Partridge and (insert silk color here.) But I found another pattern that I’d never heard of that tickled my fancy: the Gill Candy. It’s basically a Partridge and Chartreuse with a gold tag and a dubbed thorax. So I took to the vise. And here it is. Betcha steelhead would like it, too.

The Gill Candy. Hook: size 10 TMC 3769. Thread: Black. Tag: Gold tinsel. Body: Chartreuse floss. Thorax: Chartreuse Ice Dub. Hackle: Partridge.

Happy Monday and the current currentseams situation

I’ve always tried to make currentseams worthy of your time. My goal has been to make three posts a week, all original content, stuff that you can’t get anywhere else. I know, sometimes in winter currentseams feels like the very big Steve Culton promotional machine, but after all, it is show season, and I like to keep you up to date on what I’m doing and where because you might want to catch a good presentation. It benefits everyone, yes?

So: right now, we’re in the process of getting our house ready for sale. Happy-happy-fun-joy, all the packing and organizing and culling and painting and cleaning we’re doing. As you can imagine, this leaves less time for fishing and writing. But the good news is it’s only temporary. Normally this time of year I get into a writing and content wheelhouse. That’s going into a holding pattern. I’ll still be posting, but it may not be three times a week. My current thinking is that some of those posts may be revisits of good stuff from the archives. I’m guessing that many of my readers haven’t seen some of the older published articles, or some of the wet fly series I’ve done, just to name a couple. If the planets align and I go fishing, I’ll surely let you know. I appreciate both your patience and your readership.

It’s all got to get packed up. And this just the tip of the iceberg.

On a positive local fishing note, the Farmington River is finally down to an angler-friendly level. Moderate weather is forecast through the week, so it’s a good time to take advantage if you’re not stuck inside packing up your house. I would think that nymphing would be the most productive method. Try an attractor like an egg or a junk fly on the bottom with a tiny soft-hackle dropper or midge pattern above. No need to be fishing at first light — let the water temp come up and enjoy a leisurely afternoon on the water. And of course, there’s always the streamer option…enjoy!

Small Stream Report, or: I finally go fishing!

We all know the scientific certainty that all work and no play makes Jack a dull boy. But add a bout with Covid, a never-ending string of home improvement projects, change Jack’s name to Steve, and holy cow, the dullness is magnified when there’s no fishing in January.

So, I snuck out during the last few hours of the month to visit a small stream. It was chilly and overcast, but the water was a good medium height, running clear with an occasional bit of decaying vegetation detritus tumbling by, and a surprisingly warm 42 degrees. Here are some details.

I pricked four and landed three, all on a swung/dangled/stripped Squirmy Worm jig. They had no interest in the dry nor tiny nymph dropper.

I interested, but did not hook, two behemoths (for this size stream) in separate locations. Both fish came out from their holes to inspect the fly, follow it, and then ultimately reject it. In both cases, I tied on, then offered, a larger micro Woolly Bugger in black, but neither fish reappeared. Round 1 to them. (Be advised, fishies, that I know where you live.)

Most of the fish came in water moving at a moderate pace, and all of those locations offered both depth and some form of cover, be it logjams, cutbacks, boulders, etc. Another smaller guy repeatedly whacked the fly as it dangled near his hideout beneath a cutbank.

The last fish was a spawned out female, 8″-9″. Please take care not to wade in gravel beds until mid spring s that the next generation can get a healthy start.

On the board for 2024, and my first fish was a beauty. Please consider taking the Wild Trout One Photo Challenge. It’s better for the fish, the resource, and you’ll feel good about it, too.